メインコンテンツへスキップ

MetaMaskでトークンを表示する方法

Normally, MetaMask displays popular ERC-20 standard tokens (or standard tokens) you own on your account page. However, with the proliferation of tokens on Ethereum and other networks, MetaMask doesn't maintain an authoritative list of tokens — but you can add any ERC-20-compliant token you hold.

There are two different ways to add unlisted tokens to your MetaMask wallet:

まず、アドレスが保有するトークンを自動で検出してウォレットに追加する、高度な機能を有効にできます。 これには、さまざまなコミュニティのトークンリストから集められたトークンのリストが使用されます。MetaMaskは、「承認済みの」あるいは「有効な」トークンの独自のリストを保有していません。 このオプションを選択した場合は、見慣れないトークンについて常に注意を払う必要があります。

  1. よく知らない、調査していない、または信頼できると確信する理由がないWebサイトとは、やり取りしたり、ウォレットを接続したりしないでください。
  2. エアドロップされたものや、よく知らないトークンについては常に疑い、やり取りする前にデューデリジェンスを行ってください。 トークンの安全性に関するベストプラクティスの詳細は、こちらをご覧ください。
  3. トークンを使用してトランザクションを試み、トランザクションに失敗して、ブロックエクスプローラーに詐欺師が書いたWebサイトに誘導するエラーが表示された場合、それはフィッシングサイトである可能性が高いので、決してリンクをクリックしないでください。
  4. Keep informed about ways that scammers are trying to steal your funds. ウェブ上で目にする情報に、必ずしも信頼に足る適切な安全対策が講じられているわけではないことに注意してください。

トークン検出機能の強化

Only available on certain networks!

Enhanced token detection is available on Ethereum Mainnet, Linea, Avalanche, BNB Smart Chain, Polygon, Arbitrum, Optimism, Base, and zkSync.

If you're a new MetaMask user, token detection is enabled by default.

If you're an existing user, you might have to turn it on. To do so, click on the three vertical dots in the upper right-hand corner of the wallet view, navigate to 'Settings', and then 'Security & Privacy', and make sure the toggle is on.

MetaMask extension autodetect tokens settings
toggle

Once you've enabled token detection, go back to your asset list, and refresh if necessary — hopefully, any tokens you weren't seeing before are there now.

Note that token detection takes place on Ethereum mainnet regardless of whether this setting is on or off; enhanced token detection just expands this function to cover the additional networks listed above.

To see your tokens, click on the Tokens tab. Your tokens should be listed under this tab. If they're not, and automatic token detection isn't picking them up, then click on 'Import token' at the bottom.

MetaMask extension tokens tab locate import tokens
button

ここをクリックして、検索バーに移動します。

  1. 検索したいトークンに含まれる単語を入力します。 For example, if I would like to look for DAI, I just type in "D” in the bar, and the search bar will return all the suggestions.

MetaMask extension import tokens modal
search

  1. Select token of interest, and click Next to proceed. (トークンを選択するとすぐに、ボタンの境界線が青くハイライトされます)

MetaMask extension import tokens modal selected
token

  1. Click Import to proceed. それからあなたのアカウントページにリダイレクトされます。 追加したばかりのトークンがリストされています。

MetaMask extension import tokens modal
confirm

カスタムトークンを追加する方法

From the main page of Extension or Mobile, under the 'Tokens' tab, click the three dots and then 'Import tokens':

MetaMask extension tokens tab locate import tokens
button

MetaMask mobile import tokens
button

From there, you can search for your token by name, or add a custom token with the token address.

To search for a token, enter the token name in the search box. If the token doesn't appear, make sure you have enabled the correct network. Click on 'All networks', and ensure you have added the network you're looking for. Once you find your token, click 'Import', and the token should appear in your MetaMask.

To add a custom token, select the 'Custom token' tab. From there, click 'Select network', and then choose the network the token is on. Then, copy the token's address into 'Enter token contract address'. If you do not know the token's contract address, read more below. Once you have the token's address, click 'Import'.

MetaMask extension import custom token
modal

MetaMask mobile import custom
token

How to find the token address

Take a look at this article to see a couple of different ways to find your token address.

トークンを送信してきた人に、トークンのコントラクトアドレスを尋ねることもできます。

警告

If someone told you they have sent you tokens, but they are unable to provide you:

  • the token address, or
  • the transaction hash (a unique transaction ID),

it's possible that they haven't in fact done so.

ブロックエクスプローラーを使用してトークンを追加する方法

Note

In addition to Etherscan, this will work with most major block explorers, including BscScan, Polygonscan, Snowtrace, etc., as they generally share a similar design.

  1. ブロックエクスプローラーに移動します。
  2. トークンを検索します。 メニューバーの[Tokens]リンクからアクセスすることもできます。
  3. トークンのプロファイルサマリーの右上にある[More]ボタンをクリックします。
  4. [Add token to MetaMask (Web3)]をクリックします。

Etherscan add token to MetaMask menu
option

  1. MetaMask will pop up for you to confirm that you want to add the token.

Etherscan add token to MetaMask
confirmation

コインリストサイトを使用してトークンを追加する方法

Sites such as Coingecko or CoinMarketCap offer MetaMask integration that allows you to add a token to MetaMask directly from its entry on their site.

この機能を使用するには、これらのサイトのいずれかにアクセスし、検索バーを使用して追加したいトークンを検索するだけです。 次に、コントラクトアドレスを見つけて、MetaMaskのキツネのアイコンをクリックします。 ウォレットにトークンを追加するかを確定するプロンプトが表示されます。

CoinMarketCap add token to MetaMask
button

Note

On MetaMask Mobile, make sure you access the site using the in-app browser, rather than your device's standard browser. 拡張機能を使用したデスクトップブラウザと同様、これがMetaMaskインテグレーション機能を使ったウェブリンクにアクセスする唯一の方法です。

この方法なら、トークン所有者が対象のネットワークに対応するスマートコントラクトとデプロイしているかどうかによって、異なるネットワークにトークンを追加することもできます。 Click the three dots next to the contract address to select a different network, and then click the fox to add the token on that network.

Using MetaMask Portfolio

MetaMask Portfolio is a MetaMask-associated platform that aggregates and displays your token balances. Usefully, once you connect your wallet it automatically detects and displays the majority of tokens.

All you need to do is follow the link and connect your wallet. See our articles on how to use the dapp if you need more guidance.

トークンを非表示にする方法

いったん追加した後に、資産リストからそのトークンを削除することもできます。

On your wallet page, find the 'Tokens' tab and click on the token you want to remove.

ここから、右上の3つの点をクリックし、[非表示]をクリックします。

MetaMask extension hide a
token

If the token you search for is not among the most popular tokens, the search bar may not return the token you queried. In this case, you could add a custom token (manually).

Was this helpful?
Connect MetaMask to provide feedback
What is this?