MetaMask'te token'lar nasıl görüntülenir

Hızlı bağlantılar:

• Otomatik token algılama
• Arama çubuğunu kullanarak token ekleme
• Özel bir token ekleme
• Token'ları kaldırma/gizleme
• Token sözleşme adresini bulma
• Blok gezginini kullanarak token ekleme
• Bir coin listeleme sitesini kullanarak token ekleme
• MetaMask Portfolio kullanarak

Normalde, MetaMask sahip olduğunuz ERC-20 standart token'ları (veya standart token'ları) hesap sayfanızda gösterir. Bununla birlikte, Ethereum ve diğer ağlardaki token'ların çoğalmasıyla birlikte MetaMask belirleyici bir liste tutmaz; bunun yerine, sahip olduğunuz herhangi bir ERC-20 uyumlu token'ı eklemenize izin verir.

Listelenmemiş token'ları MetaMask cüzdanınıza eklemenin iki farklı yolu vardır:

İlk olarak, adresinizde tutulan token'ları otomatik olarak algılayan ve bunları cüzdanınıza ekleyen gelişmiş bir özelliği etkinleştirebilirsiniz. Bu özellik, topluluklar tarafından oluşturulan çeşitli token listelerinden toplanan token listelerini kullanır; MetaMask 'kabul edilen' veya 'geçerli' token'ların tescilli bir listesini tutmaz. Bu seçeneği tercih ederseniz tanıdık olmayan token'lar ile uğraşırken her zaman dikkatli olmanız gerektiğini unutmayın:

1. Aşina olmadığınız, yeterince araştırmadığınız veya güvenilir olduğuna inanmanız için bir neden bulunmayan hiçbir web sitesi ile etkileşime girmeyin veya bu tür web sitelerine cüzdanınızı bağlamayın.
2. Airdrop ile edinilmiş veya tanımadığınız token'lara şüpheli yaklaşmalı ve bunlarla işlem yapmadan önce bu token ile ilgili gerekli araştırmayı yapmalısınız. Token güvenliği için en iyi uygulamalar hakkında daha fazla bilgiyi buradan edinebilirsiniz.
3. Token'ı kullanarak işlem yapmaya çalıştığınızda işleminiz başarısız oluyor ve blok gezgini, dolandırıcılar tarafından yazılmış bir hata mesajı gösteriyor ve sizi bir web sitesine yönlendiriyorsa bu muhtemelen bir kimlik avı sitesidir; bu nedenle bu bağlantıya KESİNLİKLE TIKLAMAYIN.
4. Dolandırıcıların paralarınızı çalmak için kullandığı yöntemler hakkında bilgilerinizi güncel tutun. Web üzerinde gördüğünüz bilgilerin güvenilir olması için her zaman yeterli güvenlik önlemi olmadığını unutmayın.

Enhanced token detection

Only available on certain networks!

Enhanced token detection is available on Ethereum Mainnet, Linea, Avalanche, BNB Smart Chain, Polygon, Arbitrum, Optimism, Base, and zkSync.

• Extension
• Mobile

If you're a new MetaMask user, token detection is enabled by default.

If you're an existing user, you might have to turn it on. To do so, click on the three vertical dots in the upper right-hand corner of the wallet view, navigate to 'Settings', and then 'Security & Privacy', and make sure the toggle is on.

Hit the hamburger icon in the top left of the home screen, and then find 'settings'. From here, go to 'Advanced', and scroll until you find the token detection toggle.

Once you've enabled token detection, go back to your asset list, and refresh if necessary — hopefully, any tokens you weren't seeing before are there now.

Note that token detection takes place on Ethereum mainnet regardless of whether this setting is on or off; enhanced token detection just expands this function to cover the additional networks listed above.

Manually adding a token with search

• Extension
• Mobile

To see your tokens, click on the Tokens tab. Your tokens should be listed under this tab. If they're not, and automatic token detection isn't picking them up, then click on 'Import token' at the bottom.

Clicking here will bring you to a search bar:

1. Type in words contained in the token you would like to search. For example, if I would like to look for DAI, I just type in "D” in the bar, and the search bar will return all the suggestions.

2. Select token of interest, and click Next to proceed. (As soon as you select a token, the button's border will be highlighted in blue)

3. Click Import to proceed. You will be then redirected to your account page. The token you have just added will be listed.

1. On your wallet page, find the 'Import tokens' link at the bottom of the screen.

2. This will bring up the search bar. Type in the name of the token you want to add.
3. When you find the token, tap on it to select it and then scroll down so you see the 'Import' button.

The token will now be listed under your account's tokens.

How to hide tokens

Once added, you can remove the token from your asset list.

• Extension
• Mobile

On your wallet page, find the 'Tokens' tab and click on the token you want to remove.

From here, click the three dots in the top right corner, and then 'Hide'.

For both iOS and Android, long press on the token. This will bring up the option to remove it:

If the token you search for is not among the most popular tokens, the search bar may not return the token you queried. In this case, you could add a custom token (manually).

How to add a custom token

From the main page of Extension or Mobile, under the 'Tokens' tab, click the three dots and then 'Import tokens':

From there, you can search for your token by name, or add a custom token with the token address.

To search for a token, enter the token name in the search box. If the token doesn't appear, make sure you have enabled the correct network. Click on 'All networks', and ensure you have added the network you're looking for. Once you find your token, click 'Import', and the token should appear in your MetaMask.

To add a custom token, select the 'Custom token' tab. From there, click 'Select network', and then choose the network the token is on. Then, copy the token's address into 'Enter token contract address'. If you do not know the token's contract address, read more below. Once you have the token's address, click 'Import'.

How to find the token address

Take a look at this article to see a couple of different ways to find your token address.

You could also ask the person who sends you the tokens for the token's contract address.

warning

If someone told you they have sent you tokens, but they are unable to provide you:

• the token address, or
• the transaction hash (a unique transaction ID),

it's possible that they haven't in fact done so.

How to add a token using a block explorer

Note

In addition to Etherscan, this will work with most major block explorers, including BscScan, Polygonscan, Snowtrace, etc., as they generally share a similar design.

1. Go to the block explorer.
2. Search for your token. You can also go via the 'Tokens' link in the menu bar.
3. Click the 'More' button in the top right of the token's profile summary.
4. Click 'Add token to MetaMask (Web3)'

5. MetaMask will pop up for you to confirm that you want to add the token.

How to add a token using a coin listing site

Sites such as Coingecko or CoinMarketCap offer MetaMask integration that allows you to add a token to MetaMask directly from its entry on their site.

To access this, simply head to one of these sites and find the token you want to add by using the search bar. Then find the contract address and click the MetaMask fox. A prompt will appear to confirm that you want to add the token to your wallet.

Note

On MetaMask Mobile, make sure you access the site using the in-app browser, rather than your device's standard browser. This is the only way to access web links that integrate with MetaMask as you can do on your desktop browser using Extension.

This method also allows you to add the token on different networks, depending on whether a corresponding smart contract has been deployed on that network by the token owners. Click the three dots next to the contract address to select a different network, and then click the fox to add the token on that network.

Using MetaMask Portfolio

MetaMask Portfolio is a MetaMask-associated platform that aggregates and displays your token balances. Usefully, once you connect your wallet it automatically detects and displays the majority of tokens.

All you need to do is follow the link and connect your wallet. See our articles on how to use the dapp if you need more guidance.